Fletcher

When precision and accuracy are important, this is the mat cutter you need for sizing cuts, bevel cuts, and V-grooves. The Fletcher 2200 features a unique pin locator that makes setting precise, accurate borders easier than ever with faster repeat cutting.

One system for matboard, foamboard, glass, and plastic. Triple-turret cutting assembly with 3 cutting tools swivels to desired cutting operation. Optional measuring stops allow quick, same-size cutting.

Push or pull to cut in a fixed or swivel mode. Pistol grip, with anti-leak glass-cutting fluid dispensing system. Replaceable head assembly has Tungsten Carbide wheel and 140-degree cutting angle to follow a pattern.

The F-60 Straight Line Cutter has a full 62" cutting capacity, making it ideal for cutting a wide variety of semi-rigid and flexible materials easily and accurately. Made of 1.5 mm thick sheet metal, the F-60 can be used on a table or mounted to a wall using the optional Wall Mount Accessory Kit.

Tight hold is produced by driven points that bend upward, then flat down to surface. Magazine is easy to load. Tension is adjustable to density of wood. Can remove and replace materials from frame without replacing points.

Helpful for users with limited hand strength. Points go in flat to hold glass, artwork, and backing material without ripping framed materials. Easy loading magazine. Lightweight, adjustable firing power.

Professional tool forces brads and 5/8" framer's points into wooden frames up to 3" wide holding canvas, panels, boards, etc. Easy squeeze handle. Rubber cushion and minimum pressure prevents marring outside of frame.

The Fletcher GeminiPro Large Format Cutter replaces a straight edge and knife for cutting large printed graphics and other materials up to 120". It features a sight line strip for accuracy, an ergonomic cutting head, and table-mounted elevators to raise the cutter for accurate positioning.

Cuts both a 45° bevel and a 90° straightedge opening. A blade depth adjustment is for matboard and foamboard up to 1/4". Use free-hand, against a straightedge, or with any MatMate system. Has start/stop marks control.

Fletcher's MultiMaster uses new MultiPoints for framing. MultiPoints's extremely tight angle allows flush fitting to the frame for quick and easy removal of the tightest fitting glass, artwork, and matboard. Unique twin barb design with 50% more rigidity.

Safely and easily removes framer's points from wooden frames or spring clips from metal section frames.

The Fletcher PushMate insets and removes metal clips with ease. Slotted tip helps prevent slipping and damage.

The Fletcher SpringMate makes inserting and removing spring clips from metal frames easy. Just slip slotted end of the SpringMate over the spring and twist to flatten spring to insert or remove from frame.

The Titan is Fletcher's strongest bench-top cutter and trimmer. Its unique lift-and-shift clamp rail assembly allows users to switch from cutter to trimmer in seconds. The Titan is suitable for both rigid and flexible materials.