ArtMolds

This premium casting rubber may be used to make high quality masks, body parts, and as a skin over polyurethane foams. A product that is noted for its very good consistency, it may be thinned with water if needed.

This high quality polyurethane casting resin is optically clear, it is used where a hard, UV-resistant product is required. It is well suited to cast fine art, encapsulate objects, produce rapid prototypes, create special effects, and more.

ArtMolds ArtLube-100 is a release agent specifically formulated for use with polyurethane molding systems and ArtMolds' KastEZ urethane casting system, as well as other polyurethanes, epoxies, polyester resins, and silicone rubbers.

This bright white gypsum casting stone is similar to plaster of Paris in both mixing proportions and in use, and makes an ideal cast making material. It may also be used as a shell mold medium.

FiberGel is a patented formula which has the highest tear and shrink resistance on the market today. It has a 5-6 minute set time.

ArtMolds Hollywood Impressions is skin safe, and easy to use. Just add water and mix. Make a one-time mold with detail so sharp it actually reproduces fingerprints. It's the perfect choice for quick and easy moldmaking, body casting, and special effects.

These quick-setting, high quality gauze bandages saturated with gypsum and binder are suitable for making masks, shell molds and life casts. Quick-covering and easy to use, their set time is 15 minutes.

This easy-to-use casting material sets to a hard, lightweight white plastic. KastEz is ideal for castings from rigid to flexible molds for rapid prototypes, special effects, and sculpture reproductions.

KreemTex Latex is a high quality, easy-to-use, white latex mold making compound for detailed reproductions. It contains the highest concentration of latex solids for better coverage. KreemTex is supplied in concentrated form for spray, brush applications.

This is a skin-safe, two-component, room temperature cure molding rubber. Silicone rubber is used most often for casting for polyester, epoxy, polyurethane, masonry, gypsum, and wax. No release agents are needed. Set time: 8-10 minutes.

ArtMolds Liquid Sodium Silicate is a multi-purpose product with a variety of applications. It can be used as a deflocculant for greenware, seals plaster and concrete surfaces, can solidify and create a sand mold for metal casting, and can provide an instant antique look to surfaces.

Use this water-based release cream instead of petroluem jelly on the skin and all body hair. It washes out the first time, unlike petroleum-based jellies. Work a generous amount into the hair and then comb. You can cast an entire head of hair.

MoldGel is a prosthetic grade alginate that mixes easily into a smooth, creamy consistency providing the finest in forensic detail, right to the fingertips. It sets in 3 to 5 minutes. This is the right choice for applications such as torsos and faces.

ArtMolds alginates are skin safe and easy to use. Just add water and mix. They make a one-time mold with detail so sharp they actually reproduce fingerprints. This mixture has a 7–8 minute set time.

This is the finest 2-component, room temperature cure, silicon molding rubber available. With higher tear strength and long mold life, MoldRite 25 is used for casting polyester, epoxy, polyurethane, masonry, gypsum, and wax with no release agents needed.

Give your castings the look and feel of marble, wood, or metal with ArtMolds powders.

A translucent, high-strength, medium viscosity rubber, it is the softest and most flexible of ArtMolds molding rubbers. Curing at room temperature, it provides excellent elongation properties that mimic the elasticity and translucency of skin.