ArtMolds ArtLube-100 Rapid Mold Release

ArtMolds ArtLube-100 is a release agent specifically formulated for use with polyurethane molding systems and ArtMolds' KastEZ urethane casting system, as well as other polyurethanes, epoxies, polyester resins, and silicone rubbers.

A liquid external release agent that dries at room temperature, ArtLube-100 forms a monomolecular film that adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part.

ArtLube-100 may be applied to hot or cold molds by spraying, wiping, or brushing. Spraying with a fine mist is preferable because it eliminates wipe or brush marks, and results in the smoothest finish with the fastest drying time.

For best results, allow the solvent to evaporate and the surface to dry for approximately 10 minutes. For quicker drying times, dry the master or mold surface with warm air. ArtLube-100 should be used sparingly, as applying too much may build up and cover some mold details.

ArtLube-100 contains no silicone, no wax, and no stearate.