Products bearing the AP seal of the Art & Creative Materials Institute, Inc. (ACMI) are certified non-toxic. A product can be certified non-toxic only if it contains no materials in sufficient quantities to be toxic or injurious to humans, or to cause acute or chronic health problems when used as intended. See [Health and Safety ](https://www.dickblick.com/learning-resources/product-info/health-safety/ "Learning-resources/product-info/health-safety")for further information.
Products bearing the AP seal of the Art & Creative Materials Institute, Inc. (ACMI) are certified non-toxic. A product can be certified non-toxic only if it contains no materials in sufficient quantities to be toxic or injurious to humans, or to cause acute or chronic health problems when used as intended. See [Health and Safety ](https://www.dickblick.com/learning-resources/product-info/health-safety/ "Learning-resources/product-info/health-safety")for further information.
Due to differences in users’ monitors, the colors presented are an approximation of the true color.
PB15:4-Phthalo Blue
PBk9-Ivory Black
PB15:4-Phthalo Blue
organic
copper phthalocyanine
C32H16CuN8
Phthalo Blues are pure and clean primary blues with superior covering power. They have a very high tinting strength and tend to overwhelm other pigments, but if color strength can be controlled, they make predictable mixed colors. In oil form, blues are very deep and slow drying. When mixed with other colors or if chlorine is added, Phthalo Blue quickly tends towards green. When using alone, mix with some white, as Phthalo Blue can be semi-transparent and almost black on its own. It is among the most compatible of modern colors with mineral colors and is considered more reliable than Prussian Blue, while sharing the same physical and color properties. Phthalo Blue is a good color for glazing.
Phthalo Blues are completely lightfast and stable and are permanent for all paint uses. They are currently used in inks, coatings, and many plastics due to their stability and are considered a standard pigment in printing ink and the packaging industry.
Phthalo Blues have no significant hazards, although those made before 1982 contained some PCBs (polychlorinated biphenyls).
Developed by chemists using the trade name Monastral Blue, the organic blue dyestuff now known as Phthalo Blue was presented as a pigment in November 1935 in London. Its discovery was accidental. The dark color was observed in a kettle where a dye was being made from a British dyestuff plant. The demand for such a pigment came from commercial printers who wanted a cyan to replace Prussian Blue.
PBk9-Ivory Black
charred animal bone
carbon + calcium phosphate
C + Ca3(PO4)2 or C x CaPO4
Ivory Black is a cool, semi-transparent blue-black with a slight brownish undertone and average tinting strength. It mixes well with any color, and creates a range of dull greens when mixed with yellow. It has good properties for use in oil, can be slow to dry in oil form, and should never be used in underpainting or frescoing. Ivory Black is denser than Lamp Black.
Ivory Black is very lightfast and has good permanence, though it is considered the least permanent of the major black pigments.
Ivory Black has no significant hazards.
Ivory Black is a carbon based black first named as Elephantium, and described in the 4th century BCE as produced by heating ivory scraps in clay pots to reduce the ivory or bone to charcoal. The deviation in names is because the more expensive varieties of this pigment were made by burning ivory, and the less expensive ones by burning animal bone. In the 19th century, the name Ivory Black was finally permitted to be applied to Carbon Black pigments made from bone. True Ivory Black is rare in modern times due to the protection of ivory, and the synthetic variety produced today was discovered in 1929. Bone Black is produced as an industrial pigment.
UPC Code: 014173374172
ASIN #: B00LRKJ1QQ