Sculpture House

For making small to large sculptural armatures. Economical aluminum wire is lightweight, fully pliable, non-staining, and non-corrosive. Gauge sizes from 2/0 for large figures down to 16 for wrapping.

Sculpture House Casting Plaster is a pure white, slow-setting plaster that can be used for casts, molds, and direct molding.

Fine, moist, plastic clay body air-dries hard and durable, minimal shrinking. Keep moist with damp sponge during work, cover with plastic until the project is finished. No baking, casting, or kiln necessary.

Recommended for lost wax casting as well as modeling, Sculpture's House's exclusive formula is pliable but not sticky. Made in the USA.

Hydrocal is 30% to 40% harder than casting plaster and works much like plaster in mixing, pouring, and setting. Ideal for patterns, figurines, commercial casts, and sculpture. White. 5 lb.

For direct modeling or pulling waxes for bronze investment jewelry casting. Soft, nut brown, highly refined. 1-lb. block.

Sculpture House Opaque White Alabaster is a beautiful, rough cut stone for carving. Each stone weighs 4–5 lb. Blocks measure 2"W x 3"D x 6"H; cylinders measure 3-1/2"Dia x 6-1/2" long. Sizes may vary. Minor chips and flaws are normal for natural stone products. Imported from Italy.

Because soapstone is the softest stone and the easiest to carve, it's a smart choice for beginners. Features deep, rich, dark green shades throughout and a minimum of striations. Sculpture House Soapstone is certified asbestos-free. Weights and dimensions are approximate.

Sculpture House Synthetic Beeswax is a good substitute for the real thing. Ideal for advanced modeling and dressing wood sculpture. Available in 1 lb (454 g) blocks.

These wire armatures are mounted and ready to support a sculpture project. The pliable, non-staining wire easily adjusts to almost any position. Bases are formica on heavy particle board.

This set is ideal for whittling and carving small figures such as animals or bird decoys. Use it also to create the fine details on larger pieces. It includes 12 wood carving tools, made of high carbon steel.

This deluxe set of 10 essential wood sculpting tools are expertly honed and ready to use. Each tool is fitted with a leather-tipped handle for ease of use. The set comes in a canvas roll for safety, storage, and ease of transport (color of canvas roll may vary).

Full-size leather tipped percussion hand tools have been forged with the finest high-quality high carbon steel and tempered by an oil temper and heat-treating method for toughness.

This wood-handled five-piece tool set is ideal for hand-carving wood or linoleum. The kit includes: a straight gouge, a short bent, a parting chisel, a skew chisel, and a straight chisel.

These one-piece solid wood mallets are designed for light to medium wood carving. Their comfortable handles are completely wax-coated to deter possible checking.

Traditionally designed wood carving set includes an exclusive smaller mini mallet for fine detail work.

For wood carving, wood block and linoleum block printing. Set includes long and short bent gouges, straight gouge, parting tool, skew and straight chisels.

This fine set includes a variety of custom-made steel woodworking tools in a canvas roll. Contains chisels, gouges, parting tool, bench screw, rasp, mallet, sharpening oil, etc.

Generally used for fast reduction of wood to a geometric form, this 8" (20 cm) long combo wood rasp has two sides (flat and curved), each with two cutting surfaces, rough and smooth.

These are Italian-style hand-cut rasps with teeth of the finest caliber. They're made of the highest quality steel to produce a very long-wearing rasp. Approximate lengths range from 6" to 8" (15 cm to 20 cm).

Sculpture tools, with easily cleaned teeth. Handmade. Smoothly finished wood handles. Coarse and medium types.

For cleaning rasp teeth quickly and easily. Allows better rasp performance and prolongs service life.

Round rasps are set in smoothly finished octagonal wooden handles. Easy-to-clean. Hand-cut by Italian master craftsmen. 6" and 8" long.

This set of seven steel rasps imported from Italy is made for fine detail work on wood, stone, and plaster. The set includes R49, R54, R55, R66, R67, R72, and R78 rasps. Each tool measures approximately 6" in length.

A complete set of handmade high-carbon steel tools for detail and miniature work, it is a necessity for the professional and amateur alike. The 11-piece set comes in a canvas roll with individual pockets. The average tool length is 7-1/2".

This stone polishing kit contains two sheets of sandpaper, one sheet of Screen-Bak paper, approximately 0.25 lb powdered pumice, and 0.25 lb tin oxide as well as a set of instructions.

This set of high-quality tools is made of finest steel, forged and tempered for marble, limestone, and sandstone. The set of 12 chisels and a 2-1/2 lb hammer are stored in a canvas roll-up pouch.

Designed specifically for carving in soapstone, this high-quality set includes four cutting tools, one rasp, and sandpaper sheets in a variety of grits.

For marble and limestone. Hand-forged of finest tempered steel. Styles include point, chisel, and tooth.

For stone carving and sculpture. Soft iron hammers have smoothly finished wooden handles.

Essential accessories for carving in stone, sandbags are used to support the stone as you work and reduce vibrations that may cause breakage. One end of the bag is left unstitched, allowing you to fill it with the right amount of sand to suit the project at hand. The bag measures 12" x 10".

The Sculpture House Stone Carving Starter Set has everything the novice requires for carving, sanding, and hand-polishing soapstone display pieces and jewelry. It includes one piece of soapstone, plus a rasp, a carving knife, polishing oil, a dust mask, and an idea guide.

For limestone and marble cutting. Basic carving tools, forged of finest steel, tempered. Hammer and 5 basic cutting tools.

Durable all-plastic tools, 3 times stronger than wood, with desirable fexibility. Set of 12 includes tools from 6" to 8" long.

For sgraffito, detailing, finishing, etc. Two working ends are mounted on lacquered hardwood handles with brass ferrules.

These high-quality Sculpture House stainless steel tools won't rust, and are easy to keep clean. The cutting edges are ground to perfection. For feel and definition, the artist can rely on flexible ends. Perfect for wax, plaster, and plastalina.

For clean, sharp modeling of fine detail, incised design, and graffito. Tools have thin, steel cutting ends on aluminum handles. Set of 5.

Bend curves, angles, hearts, and more with the Sculpture House Wire Bending Jig. Great for making jewelry and wire sculptures, it has four interchangeable steel bending pins. Mount it on work surfaces with the included screws. Die-cast aluminum. Measures 4-1/2" x 1-1/8" x 3/4".

This glass lamp is excellent for warming the ends of modeling tools when working in wax as well as clay. The lamp measures 4"H x 3"W x 3"D.

This 4-legged steel stand is favored by colleges because of its economy and durability. The welded angle steel frame provides great rigidity. Legs are on locking swivel casters. It has a 24" (61 cm) leg spread at the base for great stability.