Fittings — Male and female threaded fittings can be used with any Iwata airbrush for connecting airhoses, regulators, and multiple-valve assemblies to the air source.

1/4" Quick Disconnect Adapter — This adapter is the male connector part of the 1/4" Quick Disconnect Set that attaches to the airbrush hose. For best results, purchase this adapter to attach to your compressor and airbrush hose and then purchase additional adapters to attach to each of your airbrush hoses.

1/4" Quick Disconnect Set — This set includes both male and female parts and is used primarily to connect the compressor to the airbrush hose on larger compressors. This allows for easy removal and connection, and completely shuts off the airflow when disconnected. Its quick-release action makes changing airbrushes fast and easy. It is rated for air pressure up to 120 PSI.

0.2 mm Fluid Needle — Use this needle with Iwata HP-A, HP-B, HP-SB, HP-AH, and HP-BH airbrush models.

0.3 mm Fluid Needle — Use this needle with Iwata HP-CH, HP-BC, and HP-C airbrush models.

0.5 mm Fluid Needle — Use this needle with Iwata Revolution Series Airbrushs models BRC, CR, and SAR.

3-Way Valve Assembly — Features leak-proof valves that are ideal for splitting air from a single air source into multiple gun setups.

Adaptor for Iwata Airbrush — For Iwata Airbrush to Badger hose.

Crown Cap — Crown Cap for Iwata HP-B and Iwata HP-C.

Disconnect Set I 60 3 — This set is used for threading onto the airbrush side of the airbrush hose. Allows for the convenient use of multiple Iwata airbrushes with one airhose.

Moisture Filter DHCL F — This moisture filter is essential for optimizing the performance of both the compressor and the airbrush. It can be attached either directly to the air source or can be placed inline between two airhoses. Regulator not included.

Moisture Filter/Regulator F — This moisture filter is essential for optimizing the performance of both the compressor and the airbrush. It can be attached either directly to the air source or can be placed inline between two airhoses.

Pistol Grip Filter — The last defense against moisture! This innovative pistol grip filter attaches directly onto any Iwata threaded airbrush delivering clean, dry air. Miniature in size, the super-fine .5 micron filter element performs like a full-size filter separator. A built-in moisture release valve and a clear housing allow you to maintain your airflow without removal.

Regulator DHCL — This regulator is essential for optimizing the performance of both the compressor and the airbrush. It can be attached either directly to the air source or can be placed inline between two airhoses. Moisture filter not included.

Quick Disconnect Adapter — This set contains both male and female Quick Disconnect adapters that screw onto the airbrush and allow users to pop the airbrush on and off different airbrush hoses (the airbrush hose must have the female connector, which is part of the Quick Disconnect Set I 160 3). For best results, purchase the I 160 3 to attach to your airbrush and airbrush hose and additional I 160 4 adapters to attach to each of your airbrushes.

Thread Sealant Tape — Used for sealing threads on all threaded fittings.