Use your vinyl cutting machine to cut your desired design on vinyl.
Remove the portions of your vinyl design where you want the ink to go through.
Apply your vinyl design to the back of the screen printing frame with transfer tape.
Use painter’s tape to cover any open areas of the screen.
Add a few tablespoons of Speedball Flex Screen Printing Fabric Ink along the top of the screen.
Placing your squeegee behind the ink, pull it toward you with a good amount of pressure. Repeat the process 2–3 times.
Lift up the screen to reveal your printed design.
Let the ink air dry completely. Heat press for 2 minutes at 350 degrees or iron for 2 minutes.