Name: SmoothOn XTC3D HighPerformance 3D Print Coating
Brand: Smooth-On

XTC-3D is a protective coating for smoothing and finishing 3D printed parts. It can be applied to both SLA and SLS prints, and it works with PLA, ABS, Laywoo filament, powder printed parts, and other rigid media. It can be used to coat EPS, EPDM, and urethane foam as well as wood, plaster, fabric, cardboard, and paper.    This coating self-levels, wets out uniformly without leaving brushstrokes, and fills in 3D print striations (eliminating almost all post-finishing work).    Smooth-On XTC-3D High-Performance 3D Print Coating cures to a hard, impact-resistant, high-gloss finish that can be sanded, primed, and painted. Adding colors and metal effects is easy, too.   Working time is 10 minutes and cure time is approximately four hours (depending upon mass and temperature). 1 oz covers more than 100 square inches.    The kit includes a foam brush, mixing stick, mixing cup, Part A (4.48 oz), Part B (1.92 oz), and instructions.  XTC-3D contains no VOCs, phthalates, or phosphates.




34841-1006-M-4ww.jpg

Smooth-On XTC-3D High-Performance Print Coating

34841-1006-2-4ww.jpg

Smooth-On XTC-3D High-Performance 3D Print Coating

34841-1006-3-4ww.jpg

34841-1006-4-4ww.jpg

Smooth-On Oomoo Silicone Rubber

Smooth-On Dragon Skin FX-Pro

Smooth-On XTC-3D High-Performance 3D Print Coating cures to a hard, impact-resistant, high-gloss finish that can be sanded, primed, and painted. Adding colors and metal effects is easy, too.

Smooth-On XTC-3D High-Performance 3D Print Coating | BLICK Art Materials

Shop Smooth-On XTC-3D High-Performance Print Coating at Blick. Find everything you need for your next creative project online.

Smooth-On XTC-3D High-Performance Print Coating | BLICK Art Materials

XTC3D is a protective coating for smoothing and finishing 3D printed parts It can be applied to both SLA and SLS prints and it works with PLA ABS Laywoo filament powder printed parts and other rigid media It can be used to coat EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper    This coating selflevels wets out uniformly without leaving brushstrokes and fills in 3D print striations (eliminating almost all postfinishing work)    SmoothOn XTC3D HighPerformance 3D Print Coating cures to a hard impactresistant highgloss finish that can be sanded primed and painted Adding colors and metal effects is easy too   Working time is 10 minutes and cure time is approximately four hours (depending upon mass and temperature) 1 oz covers more than 100 square inches    The kit includes a foam brush mixing stick mixing cup Part A (448 oz) Part B (192 oz) and instructions  XTC3D contains no VOCs phthalates or phosphates

Smooth-On XTC-3D High-Performance 3D Print Coating

Reviews