Skutt Envirovent Kiln Ventilation System

Envirovent is an effective kiln-venting system that draws out firing odors and vents them outdoors. The Envirovent creates a downdraft effect which improves firing consistency as well.

Compact and unobtrusive, the Envirovent can be attached to virtually any popular, multi-sided, electric kiln in minutes. The only modification required is the drilling of small holes in the kiln's lid and floor. Drill set is supplied.

Includes an integral blower unit in-line switch, 18" (46 cm) stainless steel exit duct, and installation and operating instructions. 3" (10 cm) rigid or flexible drier ducting (available at hardware stores) is recommended to vent to outdoors. However, a 3" to 4" adapter is included if you want to use 4" ducting. The 115V air-cooled motor is UL and CSA listed, and operates on 1.1A household current. It will not overheat or shut off due to firing heat. Limited two-year warranty. Weighs 25 lb (11.3 kg).