Rembrandt Artists' Oil Color - Warm Gray, 40 ml tube

Pigment Information

This color contains the following pigments:

PBk9-Ivory Black

PR101-Red Iron Oxide

PW4-Zinc White

Pigment Name

PBk9-Ivory Black

Pigment Type

charred animal bone

Chemical Name

carbon + calcium phosphate

Chemical Formula

C + Ca3(PO4)2 or C x CaPO4

Properties

Ivory Black is a cool, semi-transparent blue-black with a slight brownish undertone and average tinting strength. It mixes well with any color, and creates a range of dull greens when mixed with yellow. It has good properties for use in oil, can be slow to dry in oil form, and should never be used in underpainting or frescoing. Ivory Black is denser than Lamp Black.

Permanence

Ivory Black is very lightfast and has good permanence, though it is considered the least permanent of the major black pigments.

Toxicity

Ivory Black has no significant hazards.

History

Ivory Black is a carbon based black first named as Elephantium, and described in the 4th century BCE as produced by heating ivory scraps in clay pots to reduce the ivory or bone to charcoal. The deviation in names is because the more expensive varieties of this pigment were made by burning ivory, and the less expensive ones by burning animal bone. In the 19th century, the name Ivory Black was finally permitted to be applied to Carbon Black pigments made from bone. True Ivory Black is rare in modern times due to the protection of ivory, and the synthetic variety produced today was discovered in 1929. Bone Black is produced as an industrial pigment.

Pigment Name

PR101-Red Iron Oxide

Pigment Type

earth, synthetic

Chemical Name

iron oxides (synthetic), iron oxide, silica, alumina, lime, and magnesia or hydrated iron oxide

Chemical Formula

Fe2O2 or Fe2O3 x H2O

Properties

Red iron oxide varies in hue and transparency, depending on hydration and slight impurities. Indian Red is a slightly duller, deep brick hue with a bluish undertone. It is very dense and opaque, with excellent tinting strength and covering power. It is dependable when mixing with all other permanent pigments and yields good flesh tints when mixed with Zinc White. It is the synthetic version of PR102, which is a pigment made from earth reds, or natural red iron oxides, and the names applied to PR101 and PR102 often overlap. The synthetic red iron oxides have mostly replaced natural red iron oxides and are brighter, stronger, finer, and more permanent. Indian Red is the highest grade bluish shade. Light Red, English Red, and Venetian Red are yellowish shades. Mars Violet is a dull and subdued bluish or purplish oxide.

Permanence

Red iron oxide is very lightfast with excellent permanence.

Toxicity

Red iron oxide has no significant hazards.

History

Natural red iron oxide comes from the mineral ore hematite, called bloodstone by the ancient Greeks from the word hema, meaning blood. It is one of the oldest pigments, has been used by every major civilization, and was an important mineral for medieval alchemists. It was not widely used in artists' materials until the 17th century and was not produced in large quantities until the 18th century.

Pigment Name

PW4-Zinc White

Pigment Type

inorganic

Chemical Name

zinc(II)-oxide

Chemical Formula

ZnO

Properties

Zinc White is the coolest white, and it has a cold, clean masstone and a slightly bluish tint. It has less hiding power and is more transparent than other whites. It dries slowly and is good for painting wet into wet and for glazing and scumbling. Zinc White is neither as opaque nor as heavy as Lead White, its covering power is not as good, and it takes much longer to dry. However, it does not blacken when exposed to sulfur in the air as Lead White does. It is very valuable for making tints with other colors. Unmixed Zinc White dries to a brittle and dry paint film that may crack over the years, so it is not good for frescoing. It is more transparent in acrylic form than Titanium White and is the most commonly used white with gouache. Chinese White is a version of Zinc White appropriate for opaque watercolor techniques.

Permanence

Zinc White has great permanence and lightfastness.

Toxicity

Zinc White is moderately toxic if ingested and slightly toxic if inhaled.

History

Though historians are divided on who first isolated the element zinc, they agree that it was first suggested as a white pigment in 1782. Zinc White was accepted as a watercolor in 1834 and was called Chinese White due to the popularity of oriental porcelain in Europe at the time. Ten years later, a suitable oil form was produced. By the early 20th century, it had improved to the point where it was an acceptable alternative to Flake White.