R&F Pigment Stick - Neutral Gray Light, 188 ml

Pigment Information

This color contains the following pigments:

PW6-Titanium White

PB28-Cobalt Blue

PBr7-Raw Umber

PW4-Zinc White

Pigment Name

PW6-Titanium White

Pigment Type

inorganic

Chemical Name

titanium dioxide

Chemical Formula

TiO2

Properties

Titanium White is the most brilliant of the white pigments. It is considered an all purpose oil color useful in all techniques and the best all around white. Its masstone is neither warm nor cool, placing it somewhere between Lead White and Zinc White. It is less prone to cracking and yellowing than Lead White, but it still yellows easily. Titanium White dries slowly in oil form, more slowly than Lead White but more quickly than Zinc White. It is opaque in oil and acrylic forms and semi-opaque in watercolor form. This pigment has good chemical stability, and its tinting strength is superior to both Lead White and Zinc White.

Permanence

Titanium White has excellent permanence and lightfastness.

Toxicity

Titanium dioxide is highly stable and is regarded as non-toxic.

History

Titanium is the ninth most abundant element in the Earth's crust, however mineral deposits that are economical to mine are less common. Titanium dioxide was first discovered in 1821, although it could not be mass produced until 1919. Widespread use of the pigment began in the 1940s. Since that time, it has become the most commonly used white pigment. The name comes from the Latin word Titan, the name for the elder brother of Kronos and ancestor of the Titans, and from the Greek word tito, meaning day or sun.

Pigment Name

PB28-Cobalt Blue

Pigment Type

inorganic

Chemical Name

cobalt(II) oxide + aluminum oxide

Chemical Formula

CoO + Al2O3

Properties

Cobalt blue is a semitransparent pigment with low to moderate tinting strength. When it dries, it appears lighter and less saturated. Pigment particles are large and grainy. Differences in how the pigment is ground and mixed lead to considerable differences in its performance among various manufacturers.

Permanence

Cobalt blue is absolutely lightfast and extraordinarily stable. The stability of cobalt salts at high temperatures make them the standard for blues used in ceramics and glassware.

Toxicity

Cobalt salts are toxic. Avoid respiratory and skin contact. Soluble cobalt may cause irritation and allergic reaction through contact with skin. It is considered a possible carcinogen.

History

Since ancient times, smalt blue has been used to color glass and ceramics. Cobalt salts, which give smalt its characteristic blue color, were identified in the 18th century. Techniques for manufacturing Cobalt Blue, a chemically pure salt of cobalt and aluminum oxide, were developed in 1802.

Pigment Name

PBr7-Raw Umber

Pigment Type

earth

Chemical Name

hydrated iron oxide

Chemical Formula

α-FeO3+(OH) or Fe2O3 × MnO2

Properties

Raw Umber is a cool, transparent brown ranging from yellowish brown to greenish brown. It has surprisingly good tinting strength, a high level of opacity, mixes well with greens, and is quick drying in oil form. It has excellent color properties and can create a variety of subtle, clear tints when mixed with white. It grays when mixed with blue and white. Raw Umber can tend towards chalkiness in dark mixes in oil form.

Permanence

Raw Umber has excellent permanence.

Toxicity

Raw Umber itself is considered non-toxic. If contaminated by manganese compounds, it may be highly toxic if inhaled and moderately toxic if ingested.

History

This pigment gets its name from the Latin word umbra, meaning shadow or shade. Its full name is listed as terra di ombra, meaning earth of shadow/shade, due to its original extraction from the area of Umbria, Italy. It has been used as a pigment since prehistoric times. Currently, the finest umber comes from Cyprus.

Pigment Name

PW4-Zinc White

Pigment Type

inorganic

Chemical Name

zinc(II)-oxide

Chemical Formula

ZnO

Properties

Zinc White is the coolest white, and it has a cold, clean masstone and a slightly bluish tint. It has less hiding power and is more transparent than other whites. It dries slowly and is good for painting wet into wet and for glazing and scumbling. Zinc White is neither as opaque nor as heavy as Lead White, its covering power is not as good, and it takes much longer to dry. However, it does not blacken when exposed to sulfur in the air as Lead White does. It is very valuable for making tints with other colors. Unmixed Zinc White dries to a brittle and dry paint film that may crack over the years, so it is not good for frescoing. It is more transparent in acrylic form than Titanium White and is the most commonly used white with gouache. Chinese White is a version of Zinc White appropriate for opaque watercolor techniques.

Permanence

Zinc White has great permanence and lightfastness.

Toxicity

Zinc White is moderately toxic if ingested and slightly toxic if inhaled.

History

Though historians are divided on who first isolated the element zinc, they agree that it was first suggested as a white pigment in 1782. Zinc White was accepted as a watercolor in 1834 and was called Chinese White due to the popularity of oriental porcelain in Europe at the time. Ten years later, a suitable oil form was produced. By the early 20th century, it had improved to the point where it was an acceptable alternative to Flake White.