Blick StudioArtists' ColoredPencils and Sets
15% Off $45 + Free Shipping
Orders of $45 or More*
On Orders of $35 or More**
Use Code: CERY
*Exclusions apply**After discounts taken
On Orders of $45 or More**
**After discounts taken
All color making is done by hand, and processes are controlled by artists. Pigments are ground in stone rather than metal rollers.
Color Swatches created using heavy application/diluted application and were applied on cold press watercolor paper (150 lb) material.
Zinc White is the coolest white, and it has a cold, clean masstone and a slightly bluish tint. It has less hiding power and is more transparent than other whites. It dries slowly and is good for painting wet into wet and for glazing and scumbling. Zinc White is neither as opaque nor as heavy as Lead White, its covering power is not as good, and it takes much longer to dry. However, it does not blacken when exposed to sulfur in the air as Lead White does. It is very valuable for making tints with other colors. Unmixed Zinc White dries to a brittle and dry paint film that may crack over the years, so it is not good for frescoing. It is more transparent in acrylic form than Titanium White and is the most commonly used white with gouache. Chinese White is a version of Zinc White appropriate for opaque watercolor techniques.
Zinc White has great permanence and lightfastness.
Zinc White is moderately toxic if ingested and slightly toxic if inhaled.
Though historians are divided on who first isolated the element zinc, they agree that it was first suggested as a white pigment in 1782. Zinc White was accepted as a watercolor in 1834 and was called Chinese White due to the popularity of oriental porcelain in Europe at the time. Ten years later, a suitable oil form was produced. By the early 20th century, it had improved to the point where it was an acceptable alternative to Flake White.
Chinese White, French White, Permanent White, Silver White, Snow White, Zinc Oxide.
iron(III)-oxide, partly hydrated
Brown Ochre provides artists with earthtones from cream to brown and is a dull, dark variety of Yellow Ochre. Its transparency varies widely from opaque shades to more transparent ones, which are valued for their use as glazes. It has good hiding power, produces a quick drying paint, and can be safely mixed with other pigments. The highest quality Brown Ochre comes from Cyprus, where it is yellow in its raw form and is roasted to get the deeper brown-red varieties that result when water is removed. (See Yellow Ochre, PY42/43.)
Brown Ochre has excellent permanence.
Brown Ochre is non-toxic.
Ochre comes from the Greek word ochros, meaning pale yellow. It has been used since prehistoric times, and evidence of its use has been found in some of the earliest known cave paintings in Lascaux, France. It has also been called Goethite, after the German philosopher and mineralogist Johann Wolfgang von Goethe (1749-1832).
Goethite, Yellow Ochre.
Pigment PY74 is one of the most commercially important pigments of the Hansa Yellow group, considered superior to many others in its class based on both tinting strength and lightfastness. Several PY74 grades with different particle sizes are available. Grades with finer particle size are more brilliant and transparent. Pigment PY74 ranges from reddish yellow to greenish yellow, with temperature shifts from cool to warm hues. It has high tinting strength and average to slow drying time.
This Hansa Yellow has better lightfastness that other yellow monoazo pigments, particularly in the darker shades.
Hansa Yellow has no significant acute hazards, though its chronic hazards have not been well studied.
Hansa Yellows were first made in Germany just before WW1 from a series of synthetic dyestuffs called Pigment Yellow. They were intended to be a synthetic replacement for Cadmium Yellow.
Arylide, Arylide Yellow, Azo, Brilliant Yellow, Monoazo, Monolite Yellow, Permanent Yellow.
iron oxides (synthetic), iron oxide, silica, alumina, lime, and magnesia or hydrated iron oxide
Fe2O2 or Fe2O3 • H2O
Red iron oxide varies in hue and transparency, depending on hydration and slight impurities. Indian Red is a slightly duller, deep brick hue with a bluish undertone. It is very dense and opaque, with excellent tinting strength and covering power. It is dependable when mixing with all other permanent pigments and yields good flesh tints when mixed with Zinc White. It is the synthetic version of PR102, which is a pigment made from earth reds, or natural red iron oxides, and the names applied to PR101 and PR102 often overlap. The synthetic red iron oxides have mostly replaced natural red iron oxides and are brighter, stronger, finer, and more permanent. Indian Red is the highest grade bluish shade. Light Red, English Red, and Venetian Red are yellowish shades. Mars Violet is a dull and subdued bluish or purplish oxide.
Red iron oxide is very lightfast with excellent permanence.
Red iron oxide has no significant hazards.
Natural red iron oxide comes from the mineral ore hematite, called bloodstone by the ancient Greeks from the word hema, meaning blood. It is one of the oldest pigments, has been used by every major civilization, and was an important mineral for medieval alchemists. It was not widely used in artists' materials until the 17th century and was not produced in large quantities until the 18th century.
Indian Red, Colcothar, English Red, Light Red, Mars Red, Mars Violet, Morelle Salt, Pompeian Red, Indian Red, Red Oxide, Sinopia, Spanish Red, Terra Rosa, Tuscan Red, Venetian Red, Venice Red.
Your cart is currently empty.
Your cart currently contains N item.
Material Safety Data Sheet
® Old Holland is a registered trademark.