Metal Punch Tools and Kits

ArtEmboss aluminum sheets are extremely soft and pliable. Use a fine-point stylus to trace a pattern and create a work of art that stands on its, or create embellishments for a scrapbook, photo album, or any fine art project. Packages of 12 sheets.

These 5" × 5" sheets of solid Aluminum, Copper, and Brass are great for punching, embossing, rubbing, and decorating. 38 gauge Decorator Copper is Aluminum with Copper coating on one side. They are the perfect size for use with 4" × 4" Metal Smith Molds.

These boxwood tools are 5-1/2" (13 cm) long, and are made for tooling metal and leather, and modeling and sculpture. Set includes a liner for tracing, a modeler with spoon and ball tips for embossing or modeling, and a spatula for flattening and smoothing.

Make trays, plaques, planters, jewelry, and decorative pieces by embossing, tooling, repoussé, or overlay. This tooling foil cuts easily with household scissors or metal snips. The copper can be antiqued to a slate, gray finish with liver of sulphur.

This Tooling Foil is brilliantly colored on one side, and aluminum on the other. It's perfect for 3D work, mobiles, and crafts, as well as tooling. 38 Gauge (.004" Thick)

Die-cut from cardboard, these frames are for children's artwork and crafts. Frames measure 4" × 4" inside, and 6-1/2" × 6-3/4" outside. Package of 12 frames.

Here is an adaptation of the old tin punch craft, designed to be simple and safe for young children. The metal is soft enough to be punched without hammering, although hammers or flat rocks may be used to teach motor skills.

This easy-to-use punch makes holes from pin-point size up to 1/8" in tin or light metals, such as tooling foils. Sturdy plastic screwdriver handle. Overall length 4-1/2". Note- We recommend 2 layers of corrugated cardboard underneath material to be punched.

Needle point awl makes holes or marks points in leather and paper. Size, 6” long x 5/16” dia. Carded pack of 12.

These boxwood tools are 5-1/2" (13 cm) long, and are made for tooling metal and leather, and modeling and sculpture. Set includes a liner for tracing, a modeler with spoon and ball tips for embossing or modeling, and a spatula for flattening and smoothing.

Use ImpressArt Hole Punch Pliers to punch clean holes in brass, copper, nickel silver, Alkemé, pewter, and other soft metals up to 18 gauge. The pliers make a 1/16" size hole, which fits jump rings 18-gauge and smaller. A depth guard protects against scratching and marring.

This hole-punching powerhouse, which easily cuts through paper, cardstock, leather, tin, acrylic, plastic, and bookboard, also has the ability to set eyelets, snaps, washer combos, and other embellishments.

Easily punch holes anywhere on 12" × 12" surfaces. The We R Memory Keepers Crop-A-Dile II Big Bite has a 6" reach and easily cuts 1/8" and 3/16" holes through paper, cardstock, leather, tin, acrylic, plastic, and bookboard. Silent and easy to use, it sets grommets with a 1/3" center.

ArtEmboss aluminum sheets are extremely soft and pliable. Use a fine-point stylus to trace a pattern and create a work of art that stands on its, or create embellishments for a scrapbook, photo album, or any fine art project. Packages of 12 sheets.

Extremely soft, pliable metal sheets in bright metallic colors. 3 mil lightweight sheets accept the most intricate detail. 5 mil medium sheets make wonderful embellishments for projects or on their own for fine works of art.

ArtEmboss Soft Metal Sheets are easy to emboss.

These 5" × 5" sheets of solid Aluminum, Copper, and Brass are great for punching, embossing, rubbing, and decorating. 38 gauge Decorator Copper is Aluminum with Copper coating on one side. They are the perfect size for use with 4" × 4" Metal Smith Molds.

A light gauge, easily-tooled aluminum foil that is ideal for school and camp projects. Choice of coppertone or brass one side, the other side silver colored. 20 ft long roll, 4-1/2" wide.

Add metallic accents to party favors, school projects, or holiday decorations with Folia Alu Foil Rolls. Available in eight color combinations, the double-sided foil can be folded, cut, curved into shapes, even painted with transparent inks or acrylic paints. 19-1/2" x 31" rolls.

Make trays, plaques, planters, jewelry, and decorative pieces by embossing, tooling, repoussé, or overlay. This tooling foil cuts easily with household scissors or metal snips. The copper can be antiqued to a slate, gray finish with liver of sulphur.

Add some shine to your next paper-craft project with Sizzix Foil Adhesive Sheets. They're great for cards, decor, jewelry, fashion, mixed media, and more. The 6" x 6" foil sheets have an adhesive backing that easily adheres intricate die-cut shapes to projects.

This Tooling Foil is brilliantly colored on one side, and aluminum on the other. It's perfect for 3D work, mobiles, and crafts, as well as tooling. 38 Gauge (.004" Thick)