Silicone and Rubber

Easy Mold Putty is a strong, flexible, food-grade mold-making material. It's excellent for picking up small details. The putty can be heated up to 400°F, is self-releasing, and will not shrink after curing.

Smooth-On Dragon Skin FX-Pro is a soft, stable, high-performance platinum silicone rubber designed for creating makeup appliances and skin effects. It's ideal for adhering silicone appliances temporarily to the skin. 10–12 minute working time. 40-minute cure time.

Smooth-On Mold Star 16 Fast is an easy-to-use platinum silicone rubber with a six-minute pot life and 30-minute cure time. Use for casting wax, gypsum, resins, concrete, and other materials. Cures to a soft, tear-resistant, long-lasting rubber. Heat-resistant up to 450°F.

This easy-to-use silicone rubber compound is perfect for first-time silicone users who don’t have specialized mold-making equipment. Smooth-On Oomoo 25 has a convenient one-to-one by volume mix ratio, so no scale is necessary

A self-thickening, platinum-cure silcone for making brush-on molds. Apply with a brush or spatula-holds on a vertical surface without sagging. Quick cures to a soft, flexible rubber with negligible shrinkage. Package of two jars.

This premium casting rubber may be used to make high quality masks, body parts, and as a skin over polyurethane foams. A product that is noted for its very good consistency, it may be thinned with water if needed.

This is a skin-safe, two-component, room temperature cure molding rubber. Silicone rubber is used most often for casting for polyester, epoxy, polyurethane, masonry, gypsum, and wax. No release agents are needed. Set time: 8-10 minutes.

ArtMolds Liquid Sodium Silicate is a multi-purpose product with a variety of applications. It can be used as a deflocculant for greenware, seals plaster and concrete surfaces, can solidify and create a sand mold for metal casting, and can provide an instant antique look to surfaces.

A translucent, high-strength, medium viscosity rubber, it is the softest and most flexible of ArtMolds molding rubbers. Curing at room temperature, it provides excellent elongation properties that mimic the elasticity and translucency of skin.

Create a variety of makeup special effects with Graftobian Liquid Latex. It's slightly tacky when dry, perfect for adding powder, glitter, and small prosthetics to the skin. Use it prior to applying makeup or creating scars, blisters, wrinkled skin, and more.

Smooth-On Dragon Skin FX-Pro is a soft, stable, high-performance platinum silicone rubber designed for creating makeup appliances and skin effects. It's ideal for adhering silicone appliances temporarily to the skin. 10–12 minute working time. 40-minute cure time.

Smooth-On Ecoflex 00-30 is a platinum-catalyzed silicone that is versatile and easy to use. Ecoflex is suitable for a variety of applications such as cosplay, special effects applications, and for making prosthetic appliances and orthotic/orthopedic devices.

Smooth-On Ecoflex 00-35 Fast is a platinum-catalyzed silicone that is versatile and easy to use. Ecoflex 00-35 Fast is suitable for a variety of applications. Ecoflex 00-35 Fast has a pot life of 2-1/2 minutes, a cure time of approximately five minutes, and a shore hardness of 00-35.

Smooth-On Reoflex 30 is an easy-to-use urethane rubber that provides outstanding detail down to a fingerprint.

Smooth-On Skin Tite is a skin-safe silicone used to create fast wounds, scars, slash wounds, and more. It can be sculpted "on the fly,” offers maximum control, and stays precisely where you put it. Can also be used as a bio-adhesive, to adhere skin effects and silicone appliances.

Amaco Rubber Latex is a white, liquid rubber latex material for applying in layers over original models to prepare them for castings made of plaster of Paris. Finished molds are tough and flexible and will withstand multiple castings.

KreemTex Latex is a high quality, easy-to-use, white latex mold making compound for detailed reproductions. It contains the highest concentration of latex solids for better coverage. KreemTex is supplied in concentrated form for spray, brush applications.

ArtMolds Liquid Sodium Silicate is a multi-purpose product with a variety of applications. It can be used as a deflocculant for greenware, seals plaster and concrete surfaces, can solidify and create a sand mold for metal casting, and can provide an instant antique look to surfaces.

This is the finest 2-component, room temperature cure, silicon molding rubber available. With higher tear strength and long mold life, MoldRite 25 is used for casting polyester, epoxy, polyurethane, masonry, gypsum, and wax with no release agents needed.

A translucent, high-strength, medium viscosity rubber, it is the softest and most flexible of ArtMolds molding rubbers. Curing at room temperature, it provides excellent elongation properties that mimic the elasticity and translucency of skin.

Easy Mold Putty is a strong, flexible, food-grade mold-making material. It's excellent for picking up small details. The putty can be heated up to 400°F, is self-releasing, and will not shrink after curing.

This is a strong, flexible, food-grade mold-making material. The self-releasing compound is excellent for picking up small details, can be worked with for up to one hour, and cures within 24 hours with no shrinkage.

Smooth-On Mold Star 16 Fast is an easy-to-use platinum silicone rubber with a six-minute pot life and 30-minute cure time. Use for casting wax, gypsum, resins, concrete, and other materials. Cures to a soft, tear-resistant, long-lasting rubber. Heat-resistant up to 450°F.

This easy-to-use silicone rubber compound is perfect for first-time silicone users who don’t have specialized mold-making equipment. Smooth-On Oomoo 25 has a convenient one-to-one by volume mix ratio, so no scale is necessary

Smooth-on Oomoo 30 Silicone Rubber is suitable for a variety of art-related and industrial applications such as making molds for sculpture and prototype reproduction, casting plaster, resins, and wax. Oomoo 30 has a low viscosity that assures easy mixing and pouring, usually eliminating the need for vacuum degassing.

A self-thickening, platinum-cure silcone for making brush-on molds. Apply with a brush or spatula-holds on a vertical surface without sagging. Quick cures to a soft, flexible rubber with negligible shrinkage. Package of two jars.

Smooth-On Reoflex 30 is an easy-to-use urethane rubber that provides outstanding detail down to a fingerprint.