Kiln Furniture and Parts

These furniture kits include a recommended number of shelves and post assortment, plus kiln wash.

The kiln numbers have been listed for convenience in selecting the correct shelves for Amaco kilns. This does not mean the shelves are unsuitable for use with other kilns on the market.

Prevent glazed objects from touching kiln shelves with Amaco Stilt Kits. The dimensions between the points are listed behind the stilt number.

These shelf supports are very strong, durable, and will withstand temperatures up to cone 10.

These furniture kits contain shelves and posts that assemble to create great complements for the Paragon Touch-N-Fire Kilns.

Enjoy the freedom of loading your kilns in any configuration with Skutt Kiln Shelves. Half shelves allow for more loading options when working with a different shapes and sizes. Full shelves can be used for the first layer or for firing pieces of the same size and shape. Shelves are model-specific.

Kit models have various combinations and sizes of half-shelves, full-shelves, and triangular post assortments. Peephole plugs are ordered separately.

Save kiln space and classroom time with these stackable plate setters. Sturdy and easy-to-use, each set of three fires one plate. Additional sets interlock on top of the bottom one, allowing up to six plates to be fired at once. Cone 6 maximum firing.

This durable high-fire tile setter is for firing individual tiles. Stack one on top of another to fire as many tiles as you like at one time. The recommended maximum firing temperature is 2300 degrees F (cone 8).

Helps economize on kiln space when firing tiles. 7" (18 cm) long with 7 slots. Stackable. For use to Cone 10. Sold as a pair.

Fire macramé beads and other hanging objects with this versatile, space-saving tool that has two durable stoneware supports with 6" long wires. Seven heavy-gauge wires can be staggered as needed to accommodate any size object.

Featuring a Type K thermocouple, this digital pyrometer reads up to 2000°F (1093°C). It includes a battery and stand.

This dual-input digital thermometer has an 8" Type K thermocouple and includes a block and flange. It measures temperatures from 0-2350F°.

The Skutt Pyrometer operates from 0 to 2500 degrees F. Helps determine progress during firing and gives an idea for the proper shut-off time. Accurate, wall-mounted, and easy-to-install. Furnished with a heavy 8-gauge thermocouple, and a 6 ft wire, very durable.

Resistant to high temperatures, these handmade blocks make a great surface for firing enameled pieces or PMC3 creations with a butane torch.

Load and unload kiln furniture easily and efficiently with this rolling cart. Steel rods store up to 16 shelves (up to 20") vertically, separating them to reduce damage. Three shelves (included) provide room for kiln posts, cones, and stilts.

Used these pins to hold loose kiln elements in place. Element pins have sharp ends for easy insertion in the kiln wall. These pins are made of a heat-resistant alloy for temperatures up to 2500°F (cone 13). Package of 12.

Skutt kiln replacement elements come complete with connectors, pins, and instructions. Be sure to specify the voltage and phase of your kiln.

Easily lift your kiln lid with just two fingers. Easier Viewing and Programming. This wedge tilts the control panel up for easier viewing and programming. Available for all KilnMaster Kilns.

Easily lift your kiln lid with just two fingers. Easier Viewing and Programming. This wedge tilts the control panel up for easier viewing and programming. Available for all KilnMaster Kilns.

Upgrade your manual control kiln. Converts KilnSitter manual kilns to the convenience and precision of an automatic controller. It's easy! Easy to install, easy to clean. Mount at eye level for easy monitoring.

Easily lift your kiln lid with just two fingers. Available as an upgrade for your existing Skutt 10- and 12-sided kilns. (This feature is now standard on newly purchased 10- and 12-sided Skutt kilns)

These peephole plugs are for Skutt kilns.

Skutt Rolling Kiln Stands are constructed from heavy-duty, powder-coated, welded steel square tubing, fitted with locking casters made of polyolefin encased in polyurethane. They withstand high temperatures and weight. Ball bearings ensure quiet operation, even on uneven surfaces.

These quality steel-pointed stilts come in a variety of shapes. Star, 12-Point, and 10-Point Bar Stilts.