Ulano

With a higher solids content than Ulano TZ Diazo Emulsion, this pale violet, phthalate-free, water-resistant screen emulsion shares TZ's main characteristics but offers even better resolution, edge definition, and exposure latitude.

For use with weaker light sources, allows margin of exposure error. Great for high volume work. Use polyester fabric for best results. Outstanding print quality. Diazo sensitizer included.

Apply to 8XX polyester screen for textile inks. Use finer mesh for poster inks. For block-out, use the same emulsion. Washes out of screen with Ulano Stencil Remover .4. Sensitizer included.

An ideal emulsion for waterbased printing, Ulano LX-660 is a diazo-sensitized, dual-cure emulsion with superior resistance to waterbased inks and most solvent-based inks.

Specially formulated for sportswear printing, Ulano Orange is a ready-to-use SBQ-photopolymer direct emulsion. Its high viscosity makes it a good choice for mesh fabric and improves control when hand-coating screens, while its high solid content makes for faster drying and better mesh bridging.

A and B pre-measured developer for pre-sensitized indirect films. One packet each of A and B powder mixed with warm water makes 1 pint or 1 quart of developer.

Ulano Proclaim EC is a ready-to-use, diazo-free, dual-cure emulsion that eliminates diazo mixing, stirring, and de-bubbling. It has superb coating properties and durability, and is resistant to all solvent-based inks, as well as waterbased UV-cured inks.

This fast-drying diazo-photopolymer, dual-cure emulsion provides unequalled exposure latitude, even if underexposed. This emulsion has superb coating properties and durability, and is resistant to all water-based UV-cured and solvent-based inks.

Lightning-fast exposing screen emulsion for textile applications. High solids content provides stencil build per wet-on-wet coat, plus bridging of coarse textile meshes. Resists water-based textile inks.

Rubylith is a red masking film that offers extended spectral protection. It is primarily used in the camera and plate making operations for offset lithography, flexography, gravure, and screen processes where orthochromatic films and plates are used.

Removes oil and sizing from new or old screens. Use before stencil film application and after ink removal. Effective even in hard water. Non-caustic.

For removing direct emulsion or CDF direct films from screens. Fast action on all types of fabric. Easy-to-use. Contains no strong alkaline or hypochlorites. Will not etch fabrics. Odorless.

Use with all inks except water-based. Highly transparent and stable film with .003" polyester backing. Sticks back for corrections. Remove with warm water. Use all-purpose, water-based block-out.

Mechanically abrades and degreases polyester and nylon screens in one operation. (Replaces Microgrit No. 2 and Degreaser No. 3 when both operations are necessary).