The Walker System consists of the hardware — the Uprights, Bases, Stiffeners, Junctions, etc. for holding all kinds and sizes of panels to make displays and exhibits, movable and portable, temporary or permanent.
Your pegboard, plywood, wallboard or other panel is the key to an attractive and flexible exhibit in a variety of arrangements. Set-up is quick and easy, all nuts and bolts needed for assembly are furnished with complete instructions. Refer to the diagram to choose your parts. FOB factory.
Uprights — The vertical parts that hold your panel to make a display. Made of anodized aluminum. Concealed in the Upright are Clamps (1) which grip the edge of any panel not over 1/2" thick. Also concealed in the Upright are one or more Panel Supports (2) on which the bottom edge of the panel rests to insure a level and adequately supported panel. (Use 1 Upright in conjunction with a Standard and Junction Kit when a Base is not required, such as in the center of a configuration.)
Bases — Bolt to the bottoms of the Uprights (3). They hold free-standing units upright and stable. Plated steel, available in the Flat Foot Base style.
Flat Foot Base — Clean, sculptured, almost impossible to trip over. 24" long.
Standards — Consists of two uprights plus two bases.
Stiffeners and Stiffener Brackets — Clamp to the top and bottom edges of long, thin or warped panels (4). They add both stiffness and a finishing trim. Brackets (5) are included for joining Stiffeners and Uprights and providing extra strength.
Hinged Junction Kit — Everything you need to join 2, 3, or 4 Uprights or Standards for a multi-panel arrangement (6). (Uprights and Standards not included.)
Note — Please click here to contact our Product Information Department regarding questions on ordering this product or for complete components needed.
Additional Shipping Charges Note — Additional handling charges apply to orders including Walker System components. These handling charges are calculated depending on the assortment of components ordered, and cannot be calculated prior to checkout. If you include Walker System components in your order, we will contact you with final handling charges prior to processing your order.
Walker System is a trademark.