Comments about APCO Swing Arm Lamp:

Attached mine to the Futura drafting table purchased from same order. Stretches enough for use, sturdy at time of installation, cheap construction but perfect for its price.

Comments about APCO Swing Arm Lamp:

I use this lamp with its floor stand in my work room. (Painting, Mosaic and Stained Glass). I can roll the lamp round my huge table, turn it, moove it, direct the light wherever I need it. It is the most practical duo (swingarm lamp and food stand) for any studio. I would buy it again.

Comments about APCO Swing Arm Lamp:

Wonderful product. Very sturdy.

Comments about APCO Swing Arm Lamp:

WIFES SEWING LIGHT, SHE IS PLEASED WITH IT!

Comments about APCO Swing Arm Lamp:

I bought this item to replace the clamps that came with my lamps because they have started to crack and break. I like these clamps because you can secure the lamp into the clamp which makes it more stable. I felt this was definitely a good price and the shipping was reasonable also.

Comments about APCO Swing Arm Lamp:

I make jewelry and need a lamp that I can move around, and one that gives good light without breaking the bank. This one is great. Does everything I want it to do and is so portable I can use it for my show tables.

Comments about APCO Swing Arm Lamp:

Couldn't find swing arm lamp clamps anywhere, but this website had them!

Comments about APCO Swing Arm Lamp:

I bought a pair of these lamps to fill a need for copious lighting while carving waxes for jewelry casting, and I'm pleased with the sturdy construction and good, tight joints that enable the lamp to stay where it's put. Some folks complain about these lamps getting too hot, but with the newer, "warmer" fluorescent bulbs, I've not had this problem. It's a very good value, especially compared to models that are basically the same but cost four times as much because the word "architect" appears in the description!

My only minor quibble is with the way the lamp arm fits into the clamp base; there's a seam in the rolled metal post that scrapes away at the plastic when you turn it a certain way. However, if you keep the wingnut there pretty loose, it's not too much of a concern.

Comments about APCO Swing Arm Lamp:

Bought two of these for each side of our bed. Nice quality, easy adjustability, sharp looks. While this lamp has the same (or similar) stress-vulnerable plastic clamp as others of its breed, it's no worse than many and better than some. Many of these lamps outlast their clamps. The key for successful, long-term installation of any of them, especially in other than standard configuration (e.g. at the top of a tilted work surface, with weight of lamp pitched downward on the clamp) is C-clamps, available at any hardware store. If you find a way to distribute the downward forces evenly along the contact surface of the clamp, this lamp should last a long time.

Comments about APCO Swing Arm Lamp:

Surprisingly good construction for the price. Ceramic socket is a deluxe upgrade, all lamp parts very sturdy and attractive. However, mount is cheaply-made, does not secure lamp properly, and likely will break soon. If not for the inferior mount, I would give it five stars. Plastic clamp-on mounts can be made to last a lifetime; I have a few that already have, but these won't make it.