Welcome to dickblick
This easy-to-use silicone rubber compound is perfect for first-time silicone users who don’t have specialized mold-making equipment. Smooth-On Oomoo has a convenient one-to-one by volume mix ratio, so no scale is necessary.
Suitable for a variety of art-related and industrial applications such as making molds for sculpture and prototype reproduction, casting plaster, resins, and wax, both Oomoo 30 and Oomoo 25 have a low viscosity that assures easy mixing and pouring, usually eliminating the need for vacuum degassing. Both cure at room temperature with negligible shrinkage and have good tear strength.
Oomoo 25 is a faster version, with a 15-minute pot life and a 75-minute cure time. It has a soft 25A Shore hardness.
Oomoo 30 is a slightly harder version, with a 30A Shore hardness. It has a 30-minute pot life with a six-hour cure time.
see also ...
™ Smooth-On is a trademark.® OOMOO is a trademark.
CA Prop 65
Hint — click a thumbnail to enlarge.
Hint — click a thumbnail to enlarge.
(based on 48 reviews)
of respondents would recommend this to a friend.
Reviewed by 48 customers
Displaying reviews 1-10
Back to top
Previous | Next »
Oomoo is Superb
from Columbus, Ohio
Comments about Smooth-On Oomoo 30 Silicone:
I use Oomoo silicone rubber for all my molding needs. It is very strong, good quality and priced right. I love it!!. 5 stars from me!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
from San Diego
This molding material picks up details well, but tends to creep into any and all crevices despite my efforts in sealing spaces off. That being said, I am still learning to use this, and for a beginner it is very forgiving.
I use it all the time, and it's great
Blick is always easy to order from, and the product is first class.
Excellent Product If Used In The Right Situation
I posted an earlier review a year or two ago, when I posted that, I said nothing but good things after using the product for 6-8 months, but have since found a negative, but one that you can work around. When I first started using OohMoo 30, I had excellent results for many, many pours. Very flexible and offering exceptional detail. But after using for that time, I started noticing in certain detailed area's of my castings, every once in awhile an air bubble would show up that was just under the surface. I love this silicone because of it's flexibility and for the reasonable cost. So, I went out and purchased a chamber and vacuum pump. I must say I had no idea there could be such great results. These days, nothing but exceptional molds and for the past year no problems whatsoever, and I have purposely used these molds more so I could compare it apples to apples.A brand new vacuum chamber is absolutely worth the money and will help you produce top quality molds, definately invest in one! They are very easy to use....Also, last fall after purchasing a few silicone kits from DickBlick, FedEx delivered it to the wrong address. far as I know it's still sitting on someones porch somewhere! But when I called, they were very nice, apologized for inconveniencing me, and immediately sent out my order a second time, which arrived quickly at no extra charge. I sincerely appreciate that kind of quality service! A huge thank you to the Dick Blick chain for that...
Love this stuff!!
Very user friendly, I love it!
Great Stuff, but be sure to degas
from Northern IL
The Smooth On OohMoo 30 product really is great stuff. I do castings that have alot of detail. I use them for hydrocal projects. I did an earlier review and said nothing but good things about it, but I found over time, little air bubbles starter appearing in the finer details of my molds after I used them for awhile. Ever since, I have purchased a degassing chamber, and those molds are so far perfect in every way. Right now you can purchase a 2-3 gallon Vacuum Chamber with pump for around $130 to $160, it is well worth your time. Now, if your casting don't have as much detail, perhaps you can do without the degassing chamber, but I'll use it always going forward, well worth the money to give you higher quality castings. Love the flexibility of the Smooth On products though, very easy to remove your project from the molds.
Pretty good stuff
Used it to make a mold and it turned out well.
Easy as Pie!
By Williams Concrete Works
from Chester, SC
It really is the best mold making product on the market. Now I know why all the molds we've purchased in the past were purple. lol The Product is easy to use and turns out great molds. Good for Novice or Expert moldmaker
Awesome! So far the best 1:1 ratio (silicone to hardner)
By DM Wink
from Northern VA
Plan ahead and buy in the largest quantity you can afford. Great deals and the best price I've found for the OOMOO 30. Thanks Blick!
Awesome. As advertised.
By Josephus of Kartenon
from Palm Coast, Fl.
Was as advertised.
Loading item data...
Please allow ADDITIONAL DELIVERY TIME for factory-shipped items.
Click here to view expected shipping dates, or call our Order Dept (800)-828-4548.
Copyright © 2015 Dick Blick Art Materials. All rights reserved.
Your cart is currently empty.
Your cart currently contains N item.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2017 Dick Blick Holdings Inc. All rights reserved.