The GlassMaster is equipped standard with the GlassMaster Controller, which gives you the precision and versatility needed for complicated firing projects. With a 13½" chamber height, these kilns are much taller then other top firing kilns, allowing for tall slumping and drop mold projects.
Skutt's GlassMaster Kilns also feature lid and side fired elements, encapsulated Type K thermocouple, and an 8" stand.
The oval shaped
Kiln Return Policy— Kilns are
Three Phase Kilns — Three Phase electric power is available in many industrial and institutional buildings, usually with 208V power. Most facilities with Three Phase power also have separate circuits for Single Phase power. Single Phase electric power is the standard alternating current (60 hz) that is available in all homes and offices in North America, usually with 240V power. A single phase kiln can run using Three Phase power with additional equipment and wiring. Where Three Phase power is available, most high amperage circuits (that might be used to run a kiln) will be Three Phase circuits. Although electric motors such as ventilation fans run more efficiently (require fewer watts) on a Three Phase circuit, kiln heating elements do not. However, it is possible to run a Three Phase kiln using a smaller (lower amperage) circuit than would be required for a comparable Single Phase kiln, if power capacity (amperage) is an issue. Three Phase kilns will not run on Single Phase power. Always consult a licensed electrician before installing a high power electric kiln.
® Skutt is a registered trademark.