Welcome to dickblick
Microcrystalline Wax, a soft, nut brown colored wax, is used for direct modeling, and for pulling waxes for bronze investment jewelry casting.
see also ...
® Sculpture House is a registered trademark.
(based on 5 reviews)
of respondents would recommend this to a friend.
Reviewed by 5 customers
Displaying reviews 1-5
Back to top
(1 of 1 customers found this review helpful)
EXCELLENT PRODUCT TO HAVE ON HAND
By SCULPTRESS OF BEARS
Comments about Sculpture House Microcrystalline Wax:
I AM A WILDLIFE SCULPTRESS AND I USE THIS WAX FOR ANTLERS, HORNS , NOSES AND LITTLE DETAILS NEAR MOUTHS ECT. INCLUDING ENTIRE BEAR SNOUTS. I ALSO COMBINE A SMALL AMOUNT OF OIL-BASED CLAY WITH THE WAX FOR EYES AND EARS. EXCELLENT STUFF.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(2 of 2 customers found this review helpful)
"good, easy and efficient"
It was perfect for my wax moldI will definitely use it again and again, I wish it was cheaper
Images shared by CMAssart
latest wax mold made
(7 of 7 customers found this review helpful)
Carving Microcrystaline wax
from new mexico
This type of microcrystaline wax is used in lost wax casting. It is designed for liquid to solid modeling (using clay and wax modeling tools)and for pouring. Molds are easy to take from wax models. Stickiness is essential. Work in a cool room or chill it periodically to keep it from getting too soft (store your work in a refrigerator or in cool water.) This wax is not designed for carving. If you want to carve, buy a jewelers wax.
(3 of 4 customers found this review helpful)
Perfect for investment casting
from New York
Great wax for investment casting. Low melting point; it can be melted on a stove, poured into a silicon mold and finally be melted out from the investment in a kitchen oven. Great to work with as it's not brittle and is almost spreadable at hand temperature, which allows easy fixes for small imperfections. Sets pretty hard, too. Probably less suitable for wax carving as it's relatively sticky at room temperature and thus doesn't give great detail.
Images shared by Brenda
wax and clay model
Tags: Made with Product
wax with sprue attached and sculpey model
(6 of 14 customers found this review helpful)
Horrible wax for carving
By B M
from Pasadena, ca
I am a carver sculptor.The Dickblicks in pasadena just started supplying wax materials. Thought it would be great to get my wax supplies localy. This brown wax is not labeled in the store, but it is the only brown wax they carry. It is not a good carving wax.It has a low melting point, and becomes too soft within seconds of skin contact. It is also very tacky and sticks to the tools when cool. It would be a good wax for hand modelers that like that, but why use wax like it is clay when you can use sculpey with less stress.
Bottom Line No, I would not recommend this to a friend
Merchant response: At Blick we always attempt to provide the best information possible to our customers. In this case, the Sculpture House Microcrystalline Wax may not be the right material to use. If you ever have specific questions regarding our products or how to use them, please contact our Product information department at email@example.com or by calling (800) 933-2542. Our product specialists will be happy to help you with questions about art materials, product applications, and techniques.
Loading item data...
Please allow ADDITIONAL DELIVERY TIME for factory-shipped items.
Click here to view expected shipping dates, or call our Order Dept (800)-828-4548.
Copyright © 2015 Dick Blick Art Materials. All rights reserved.
Your cart is currently empty.
Your cart currently contains N item.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2017 Dick Blick Holdings Inc. All rights reserved.