Welcome to dickblick
Use these solutions alone as a finish coat or as a base for treating with any patina solution. Application of 8 oz will cover 15 square feet, 16 oz will cover 20 square feet, and 1 gallon (128 oz) will cover 200–250 square feet.
This liquid of pure ground bronze produces a dark brown surface.
A liquid of pure ground bronze. Produces a light brown finish.
This solution with aluminum particles produces a metallic blue finish. Use it alone, or as a base for with any of the patina solutions.
A liquid solution with pure ground copper.
A bright gold-colored solution with ground metal particles.
Use this solution of metal particles to create a warm gray finish.
This solution is made with ground aluminum and creates a silver metallic finish with a blue cast.
Made with ground aluminum, this solution creates a beautiful silver finish.
A solution made with stainless steel particles.
see also ...
® Sophisticated Finishes is a registered trademark.
Hint — click a thumbnail to enlarge.
Hint — click a thumbnail to enlarge.
(based on 9 reviews)
of respondents would recommend this to a friend.
Reviewed by 9 customers
Displaying reviews 1-9
Back to top
Sophisticated Finishes worked great for me
By Just Paint It
from Heber Utah
Comments about Sophisticated Finishes Metallic Surfacer Solutions:
I purchased blonde bronze metallic Surfacer, this product goes on nice and has a great look to it. I put it on my stair railings before we installed glass. I had planned on putting the green patina on the top of it but after a couple test runs decided I don't care for how it looks/works. I cant say enough good about the bronze and copper paints but I really could not get the look I was after with the patina surfacer. Also the primer/sealer is a ok product but after purchasing a couple gallons I changed to using a plain water based polyurethane which seems to work the same and is much cheaper.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Great products. Worked as noted
from Pittsburgh, PA
Received my order quickly. Products worked as expected. Created a nice patina
The Top Quality Surfacer
from New Delhi
Always enhances my creativity.
Love this product
By Pam the pom lover
from Mesa AZ
I have used this product on several projects in the past. I have used it on mirrors, candle holders, picture frames, and metal tables. It has wonderful coverage and I love the finish. My friends comment on how nice the finished product looks. The only thing I don't like is that it tends to dry out if stored for very long.
from New York
Really easy to use. Excellent results. I used it on plaster. It came out with a great bronze look. It went a long way , I bought the 8 Oz. Bottle and had a lot left over.
Images shared by Glenn
Bronzed Lincoln life mask
(1 of 1 customers found this review helpful)
I use Blonde Bronze and Copper Topper
from Richmond VA
Use these with the green patina on sculptural pieces. After a little practice you can achieve really great results.
going for gold
By Mama Bear
from New Bern , NC
used on stone to achieve the look that was required for a special project.
(6 of 6 customers found this review helpful)
from Mesa, AZ
I use these for adding or touching up a finish for small to medium jewelry pieces. I find this product offers excellent coverage and a little goes a long way.I will say that I found the silver/gray finish a little flat on round objects,and may try the silver/blue or pewter. But on flat, I found it worked very well and did not have that"painted" look. I used both a small brush and q-tips, and I prefer the q-tips as the layer tends to be a little thicker and you may not have to reapply. The copper I use more often, and as it often covers solder marks I usually have to use two to three coats,and it looks very natural. Make sure that the metal is clean and any residue build up should be scrubbed away. A brush offers better control and cleans up very easily with water. Spotting or mistakes can be removed with water and either a brush or q-tip easily as long as it is still wet, and there is very minimal smearing. This product dries quickly with strong color to provide good even coverage. Use a durable sealer with this and other surface finishers for pieces that will be handled often.
(8 of 8 customers found this review helpful)
Looks great, easy to use
from San Francisco
This stuff works great for throwing a finish on old fixtures. I used the blackened bronze surface for some brass light fixtures that came with our house. They'd been lacquered and the only alternative to the garish brass finish was using lacquer thinner to remove the finish, then using some agent (like the obnoxious-smelling liver of sulfur) to tarnish it.Rather than submit myself to the fumes and labor, I painted the fixtures in place with the black bronze and after three coats with a fine nylon utility brush (Loew Cornell 1177) you can't tell them from the other bronze fixtures. The blond bronze didn't look quite as good, but might be fine if you're going to use on something outdoors or use a patina agent on it. (The green patina agent works better than the black, but you need to put it on while the paint is still wet so the metal particles suspended in the acrylic can be exposed to the chemical.) The clean up is a snap with just soap and water, as this stuff has an acrylic base, and there's no odor to speak of. I can't wait to use some of this stuff in my art as a surface for an oil painting.
Loading item data...
Please allow ADDITIONAL DELIVERY TIME for factory-shipped items.
Click here to view expected shipping dates, or call our Order Dept (800)-828-4548.
Copyright © 2015 Dick Blick Art Materials. All rights reserved.
Your cart is currently empty.
Your cart currently contains N item.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2017 Dick Blick Holdings Inc. All rights reserved.