Welcome to dickblick
This versatile and revolutionary product allows any design, including original art to be transferred onto almost any surface, with amazing results.
Unlike heat set transfers, Lazertran is a waterslide transfer paper and the process is simple. Photocopy or use a laser printer to create color images on Lazertran paper, cut to size, soak in water, and easily slide the transparent decal from the paper backing. Decals can then be applied to wood, paper, stones, glass, metal, candles, walls, clay, and much more!
Lazertran Silk transfers images onto silk fabric with an iron rather than decal. The results are vibrant and the silk remains soft to the touch.
Each pack includes ten 8½" × 11" (22 cm × 28 cm) sheets. Detailed instructions included.
see also ...
Lazertran is a trademark.
Hint — click a thumbnail to enlarge.
Hint — click a thumbnail to enlarge.
(based on 38 reviews)
of respondents would recommend this to a friend.
Reviewed by 38 customers
Displaying reviews 1-10
Back to top
Previous | Next »
(1 of 1 customers found this review helpful)
Found the best
By Daddy King
Comments about Lazertran Transfer Paper:
Started working in a new medium that involves water slide decals. I didn't think there could be too extreme a lattitude between paper qualities - I was wrong. Way wrong. I'm printing fine art transfers to be used on varied substrates. The first two brands I tried were horrible for color and resolution, and wouldn't release after many minutes of soaking - to the point that the decal became too fragile to transfer. Even after spraying it with a couple of coats of Krylon clear! But this Lazertran is it. Flat eggshell photo finish - prints my art with crystal clarity. It's ready to go in 60 seconds, and NO SPRAYING! No bleed no nothing. I should mention I use an Artisan 1430 with Claria ink. I love this stuff. Ordering more today.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Dick Blick Is My One Source
from St. Louis, MO
I use Lazertran to personalize many products for children, adults and pets. Dick Blick is my one source for such products.
Images shared by Shelley
Personalized Ceramic Baby Dish and Cup
Tags: Made with Product
Personalized Child Stepping Stool
Great Photo Transfers
By Photo Nut
from Clearwater, Florida
I found the Lazertran product to be a great way to transfer my original photography to wood and other materials.Very close to an oil painting. I'll continue to use them.
Lazertran Transfer Paper for Inkjet
from Owensboro, KY
This product was easy to use and performed exactly as expected - no surprises!
Helped me make a great welcome home for my son in the Navy
By Brian - proud Navy Dad
Works great and very easy ! Pre cut picture to fit project after printing, Apply a even coat of pure turpentine on work surface then soak picture in water till it starts to seperate from paper slightly. Next slide picture onto project ( do not attempt to remove from paper and lay down by hand as it will be fragile and possibly tear) just slowly slide it off the paper into place. With a little amt of turpentine on brush lightly brush out wrinkles. Then just sit back and let it dry while you admire your work!
Images shared by Brian - proud Navy Dad
Used picture of his face to make it look like him
Tags: Using Product, Made with Product
Tags: Made with Product, Using Product
I realy like this product and will buy it again.
By Eva the clayer
from Colorado Springs ,Co
I use this product for polymer clay.The only problem is taking to the printer the first time they did a great job. But the second time they damage my paper.went to another printer and damage my paper to. Even I show then the instructions. I have tray the inkjet paper but don't like it.
I Dint like to much the inkj lazertrans .
from Colorado Springs
I use it for polymer clay. Is not to ease to use .Rather use the Lazertran paper .For lazer printers.
Bottom Line No, I would not recommend this to a friend
Good Value and Quality
from Rochester, MN
I bought more Prismacolor pencils to fill in gaps in my collection. I mainly use them for adult coloring books and rubber stamped greeting cards. The pigment seems to be in the middle: notso hard that it breaks easily and not so soft that it can't hold a point. They lay down a nice layer of pigment, blend well, and burnish to a smooth, even color. Very happy with them.I would especially recommend them to beginning colorists because of the good value and wide variety of colors available.
(4 of 4 customers found this review helpful)
from Vancouver, BC, Canada
I love Lazertran for ink jet. I use it all the time - primarily I print and transfer vinrage images onto stone tiles, but have used it for various other projects and am always highly satisfied. I have been buying and using it for several years and have never had any issues.
Images shared by Sadie
Images printed with Lazertran, sealed with resin
(2 of 2 customers found this review helpful)
from Saskatchewan, Canada
I like the way this transfer can be baked onto ceramics for a hard finish. I do find that the color can be a bit different on the transfer from the original. Something to consider. It is quite easy to use.
Loading item data...
Please allow ADDITIONAL DELIVERY TIME for factory-shipped items.
Click here to view expected shipping dates, or call our Order Dept (800)-828-4548.
Copyright © 2015 Dick Blick Art Materials. All rights reserved.
Your cart is currently empty.
Your cart currently contains N item.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2017 Dick Blick Holdings Inc. All rights reserved.