Welcome to dickblick
Designed by master pinstriping legend Steve Kafka, these brushes will unlock the mysteries of his style and enable to user to stripe curves as never before. These brushes turn corners with ease, flow striping enamels like no other brushes, and allow the user to do design work without the chance of “flare-out.” The sizes range from 0 through 6. They are all extremely versatile but could be considered specific relative to their size. The brushes are best used between 55 and 80 degrees to the surface of the work.
All Kafka signature series pinstriping brushes can turn corners without “flare-out” and without the user “rolling the brush”— just lift and work the tip for designs that usually take years to master. Works equally well with urethanes and oil-based enamels. Made by master brush makers to last and perform longer than any brush ... ever.
The size 0 brush is the smallest available. It's capable of turning very tight corners and very fine design work while still maintaining great line consistency due to the nature of design and combination of synthetic and natural hair.
The size 1 is slightly larger than the 0 and will perform the same as the 0 with a slightly heavier line. As with all the Kafka brushes, they perform with oil-based enamels as well as urethane striping paint.
The size 3 will work in a wide variety of applications from scroll striping to shorter, long-line designs. This brush will give the user greater control in all applications and flatten the learning curve for novice stripers. The size 3 is also the most used favorite of its designer, Steve Kafka.
The size 5, which is slightly larger than the size 3, holds more paint and will accomplish heavier designs with ease. Depending on pressure, the line thickness can reach 1/4" and fine lines to 1/16" in the other direction. This brush is a favorite for outlining larger flame layouts, cars, trucks, and semi trucks.
The size 6 will give you the heavier lines needed in many instances, but still can deliver delicate design work. It's used for initial layouts followed by smaller sizes for more delicate additions in beautiful combinations.
see also ...
™ Kafka Design is a trademark.
Hint — click a thumbnail to enlarge.
Hint — click a thumbnail to enlarge.
(based on 28 reviews)
of respondents would recommend this to a friend.
Reviewed by 28 customers
Displaying reviews 1-10
Back to top
Previous | Next »
Not for swirls or curlicues
By Whimsical Art Girl
from Green Mountains
Comments about Kafka Design Pinstriping Brushes:
This brush is best suited to long straight lines or small gentle curves. If your application requires lots of swirls or curlicues this is difficult to use. I ended up taking an old script liner brush and trimming about a 1/3 off. That works much better for what I need, and gives the control lacking in this pinstriping brush.On the positive side: The brush itself is well made and I was impressed with the length of the individual bristles.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
By Sandy Cohen
from North Port, FL
great for marbling
Bottom Line Yes, I would recommend this to a friend
(0 of 1 customers found this review helpful)
By B BEAR ESSENTALS
from LAND O' LAKES, FL
STRIPPING, SCROWLING AND LETTERING
BEST BRUSH FOR THE MONEY
from NEW MEXICO
PAINT FLOWS BEAUTIFULLY OFF BRUSH - THE BEGINNER BECOMES AN EXPERT WITH A LITTLE PRACTICE
By Cigar Bob
from Jenison, Mi
The ease of using this brush makes it wonderful to work with.
(1 of 1 customers found this review helpful)
Kafka Striping Brushes
By Dean Jones "The Sign Guy"
from Bakersfield, CA
I've been doing signs & lettering for 27 years the RIGHT way-still no computers- just pencil and chalk and pounce patterns and paint. Not too many left like us. Anyway, began messing around with striping only a few months before,after years of prodding from friends and clients, and these Kafka brushes just make the process almost effortless. The brush really seems to have kind of it's own instincts, and IT wants to do the work!And Dick Blick is THE BEST! Thanks for still being there when I need the correct materials for Hand Painted Signage.Sincerely, B.D. Duffel Bakersfield, CA.
I love these brushes!
from Durham, NC
Are use these brushes to paint my Matta Ortiz style pottery, they work great
Images shared by Jeffro
Tags: Using Product
By Prof. Maxx
from Natchitoches, LA
I would recommend these to anyone! some of the best brushes I own
My "go to " brush: preferred for highly detailed painting.
By Collayne, animal artist
from Ontario, Canada
I discovered the Kafka brushes December 2015. Painting animals, the brushes offer fine line detail yet push a surprising amount of oil paint and medium. I use the 5/0 brush several hours every day and they are durable – even against canvas texture, although I usually paint on smooth panels. Every year it becomes more difficult to purchase Kolinsky sable brushes, made in France and those brushes are beautiful but don't take the "wear n tear". The Kafka brushes perform beyond my expectation. I'm so pleased to have found them. Special thanks to Kafka & 4 years of research & development: the brush is "just right" for my purpose.
from Santa Cruz, Ca
This is a fun striping brush with lots of control. I will buy the other sizes as I can afford them.
Loading item data...
Please allow ADDITIONAL DELIVERY TIME for factory-shipped items.
Click here to view expected shipping dates, or call our Order Dept (800)-828-4548.
Copyright © 2015 Dick Blick Art Materials. All rights reserved.
Your cart is currently empty.
Your cart currently contains N item.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2017 Dick Blick Holdings Inc. All rights reserved.