Welcome to dickblick
Williamsburg Oil Paints source the best raw materials in the world. Each is carefully ground to enhance the beauty and luminosity specific to each pigment. These paints are uniquely hand-crafted and of the highest quality available.
Color Swatches created using heavy application/medium application/50% tint and were applied on acrylic primed canvas (7 oz) material.
mixed metal oxide
Nickel Titanium Yellow is one of the cleanest and brightest of the inorganic pigments. It has a low tinting strength and average to slow drying time.
Nickel Titanium Yellow has excellent lightfastness and outstanding stability with regard to chemicals, weather, and heat. It is durable in exterior conditions.
Nickel Titanium Yellow is not considered toxic.
Nickel Titanium Yellow was developed in the 1960s.
Nickel Titanate Yellow, Nickel Yellow.
Fe2O3 • H2O
Yellow Ochre provides artists with earthtones from cream to brown. It has good hiding power, produces a quick drying paint, and can be safely mixed with other pigments. Its transparency varies widely from opaque shades to more transparent ones, which are valued for their use as glazes. If gypsum is present, Yellow Ochre is not suitable for frescoing. (See Brown Ochre, PY43.) PY42 is made from synthetic iron oxides. PY43 is made from natural iron oxide.
Yellow Ochre has excellent permanence because ochres are some of the most permanent pigments available.
Yellow Ochre is non-toxic unless it contains manganese.
Ochre comes from the Greek word ochros, meaning pale yellow. It was one of the first pigments to be used by human beings, and evidence of its use has been found at 300,000 year old sites in France and the former Czechoslovakia.
Chamois, Iron Yellow, Mars Orange, Mars Yellow, Minette, Ochre, Sil, Yellow Earth, Yellow Oxide. Varieties of Yellow Ochre include Brown Ochre, Flesh Ochre, Roman Ochre, Spruce Ochre, and Transparent Gold Ochre.
Zinc White is the coolest white, and it has a cold, clean masstone and a slightly bluish tint. It has less hiding power and is more transparent than other whites. It dries slowly and is good for painting wet into wet and for glazing and scumbling. Zinc White is neither as opaque nor as heavy as Lead White, its covering power is not as good, and it takes much longer to dry. However, it does not blacken when exposed to sulfur in the air as Lead White does. It is very valuable for making tints with other colors. Unmixed Zinc White dries to a brittle and dry paint film that may crack over the years, so it is not good for frescoing. It is more transparent in acrylic form than Titanium White and is the most commonly used white with gouache. Chinese White is a version of Zinc White appropriate for opaque watercolor techniques.
Zinc White has great permanence and lightfastness.
Zinc White is moderately toxic if ingested and slightly toxic if inhaled.
Though historians are divided on who first isolated the element zinc, they agree that it was first suggested as a white pigment in 1782. Zinc White was accepted as a watercolor in 1834 and was called Chinese White due to the popularity of oriental porcelain in Europe at the time. Ten years later, a suitable oil form was produced. By the early 20th century, it had improved to the point where it was an acceptable alternative to Flake White.
Chinese White, French White, Permanent White, Silver White, Snow White, Zinc Oxide.
Your cart is currently empty.
Your cart currently contains N item.
CA Prop 65
Material Safety Data Sheet
® Williamsburg is a registered trademark.
Dick Blick Art Materials®, Blick®, Blick Studio®, and Artists Pick Blick® are registered trademarks of Dick Blick Holdings Inc.
© Copyright 1999-2015 Dick Blick Holdings Inc. All rights reserved.