Kiln Furniture and Parts

These furniture kits include a recommended number of shelves and post assortment, plus kiln wash.

Kit models have various combinations of shelves, shelf supports, and a carton of Kiln Wash.

The kiln numbers have been listed for convenience in selecting the correct shelves for Amaco kilns. This does not mean the shelves are unsuitable for use with other kilns on the market.

Save kiln space and classroom time with these stackable plate setters. Sturdy and easy-to-use, each set of three fires one plate. Additional sets interlock on top of the bottom one, allowing up to six plates to be fired at once. Cone 6 maximum firing.

These shelf supports are very strong, durable, and will withstand temperatures up to cone 14.

Fire many beads at one time with this tree. It has 12 shorter wires to prevent sagging, which are removable for firing long objects. Cone 6 Maximum. Replacement wires are available in sets of 12. Tree is 5" wide × 4-3/4" tall. Wires are 1-7/8" long.

Amaco offers two different stilt kits. Dimensions between points are listed behind stilt number. Cone 7 max.

This durable high-fire tile setter is for firing individual tiles. Stack one on top of another to fire as many tiles as you like at one time. The recommended maximum firing temperature is 2300°F (cone 8).

Load and unload kiln furniture easily and efficiently with this rolling cart. Steel rods store up to 16 shelves (up to 20") vertically, separating them to reduce damage. Three shelves (included) provide room for kiln posts, cones, and stilts.

For supporting kiln shelves. Ceramic Square Post Kit contains 4 each of sizes ½”, 1”, 2”, 4”, 6”, and 8”.

Used these pins to hold loose kiln elements in place. Element pins have sharp ends for easy insertion in the kiln wall. These pins are made of a heat-resistant alloy for temperatures up to 2500°F (cone 13). Package of 12.

Use these kits to assemble furniture for L&L kilns.

Helps economize on kiln space when firing tiles. 7" (18 cm) long with 7 slots. Stackable. For use to Cone 06 (1830°F). Sold as a pair.

These furniture kits contain shelves and posts that assemble to create great complements for the Paragon Touch-N-Fire Kilns.

S-Type are the most accurate thermocouples available and do not degrade under the harsh environment of Cone 6 and Cone 10 firings. This could be the last thermocouple you ever have to buy. Requires special controller and thermocouple wire.

Featuring a Type K thermocouple, this digital pyrometer reads up to 2000°F (1093°C). It includes a battery and stand.

Upgrade older model kilns and prolong relay life. This board, found only in Skutt kilns, eliminates the relay arcing found in other brands, thus significantly reducing the cost of maintaining your kiln.

These shelves, sold individually, fit for the Skutt kiln.

Kit models have various combinations and sizes of half-shelves, full-shelves, and triangular post assortments. Peephole plugs are ordered separately.

Easily lift your kiln lid with just two fingers. Easier Viewing and Programming. This wedge tilts the control panel up for easier viewing and programming. Available for all KilnMaster Kilns.

Upgrade your manual control kiln. Converts KilnSitter manual kilns to the convenience and precision of an automatic controller. It's easy! Easy to install, easy to clean. Mount at eye level for easy monitoring.

Easily lift your kiln lid with just two fingers. Available as an upgrade for your existing Skutt 10- and 12-sided kilns. (This feature is now standard on newly purchased 10- and 12-sided Skutt kilns)

These peephole plugs are for Skutt kilns.

The Skutt Pyrometer operates from 0 to 2500°F. Helps determine progress during firing and gives an idea for the proper shut-off time. Accurate, wall-mounted, and easy-to-install. Furnished with a heavy 8-gauge thermocouple, and a 6 ft wire, very durable.

These replacement elements are fully performed with connectors and instructions. Be sure to specify the voltage and phase of your kiln.

Fire macramé beads and other hanging objects with this versatile, space-saving tool that has two durable stoneware supports with 6" long wires. Seven heavy-gauge wires can be staggered as needed to accommodate any size object.

These quality steel-pointed stilts come in a variety of shapes. Star, 12-Point, and 10-Point Bar Stilts.