Screen Printing Chemicals

Table-Tac water soluble adhesive holds textiles, thin substrates, and even plastics in place on printing pallets. It eliminates the need for expensive vacuum tables to maintain registration. Table-Tac dries insoluble, and is easy to re-tack when dry.

General purpose, medium dry grade for thinning clear and pigmented lacquer-based inks and paints, and for removing lacquer based handcut film from screens. Cleans brushes, rollers, and degreases parts.

For dissolving inks. Spray on dried-on area of screen. For all solvent-based screen printing inks. (Not for lacquer-based stencils).

Sprayway Anti-Skin Spray prevents ink skinning on rollers, fountains, screens, and squeegees.

Sprayway Flash Adhesive is a Hexane-free, California V.O.C. compliant premium mist adhesive formulated for flash-cure applications. Use on Flash Dryers to prevent fabric movement.

Sprayway Screen Opener opens up dried-up ink areas, preventing screen clogging without leaving a film. It is compatible with all screen inks.

For removal of indirect, pre-sensitized stencil film from all types of screen fabric. Odor free. Use with hot water.

Removes oil and sizing from new or old screens. Use before stencil film application and after ink removal. Effective even in hard water. Non-caustic.

For attaching hand-cut film stencils to screens. Also works well with Speedy Squeegee Film.

For removing direct emulsion or CDF direct films from screens. Fast action on all types of fabric. Easy-to-use. Contains no strong alkaline or hypochlorites. Will not etch fabrics. Odorless.

Mechanically abrades and degreases polyester and nylon screens in one operation. (Replaces Microgrit No. 2 and Degreaser No. 3 when both operations are necessary).

Screen wash-up dissolves all ink systems efficiently with a minimum of time and effort. Meets standards for safe and effective cleaning of all inks used in the printing process of screen printing.

Removes all solvent-based inks from screens after printing, leaving the film stencil intact.

This non-solvent citric acid formula is highly effective for cleaning plastisols and waterbased inks from screens. It is safe for the user and the environment.

At last, a highly effective screen filler remover and screen cleaner! Makes screen cleaning a breeze! Apply to both sides of screen, scrub, then apply again. In just 3-5 minutes, screens come clean using hot water and a nylon brush.

Used with either water or solvent-based inks on polyester screen fabrics only. Available as Diazo System or Bichromate System. (Reclaim screen with Ulano Stencil Remover No. 4).

For use with weaker light sources, allows margin of exposure error. Great for high volume work. Use polyester fabric for best results. Outstanding print quality. Diazo sensitizer included.

Apply to 8XX polyester screen for textile inks. Use finer mesh for poster inks. For block-out, use the same emulsion. Washes out of screen with Ulano Stencil Remover .4. Sensitizer included.

A and B pre-measured developer for pre-sensitized indirect films. One packet each of A and B powder mixed with warm water makes 1 pint or 1 quart of developer.

This fast-drying diazo-photopolymer, dual-cure emulsion provides unequalled exposure latitude, even if underexposed. This emulsion has superb coating properties and durability, and is resistant to all water-based UV-cured and solvent-based inks.

Lightning-fast exposing screen emulsion for textile applications. High solids content provides stencil build per wet-on-wet coat, plus bridging of coarse textile meshes. Resists water-based textile inks.

Use this fast-drying, water soluble blockout with solvent-resistant films and emulsions for pinhole-free blockout on all fabrics. It has excellent flexibility, is non-cracking, resists humidity, and prevents sagging screens.

For spotting pinholes and quick-fix repair of minor screen breakdowns. Replaces masking tape for jobs in progress. Blocked out pinholes will stand up to repeated screen wipings. Flash dry, water-water-soluble.

For positive screen printing. Brush Drawing Fluid on areas to print. Spread Screen Filler over entire bottom side of screen. Spray water onto top of screen to wash out covered areas. Print with water-based ink.

Water-based block-out, best for use with solvent-based inks. Thin with cold water for touch-ups. For use with water-soluble films.

Increase productivity and decrease down time by drying out screen printing frames in this portable drying unit, or for other low-temperature drying applications. Easy to use, it saves time and improves screen quality, drying screens quickly and evenly.

Maximize productivity with heavy-duty washout stands designed for pressure cleaners. Translucent fiberglass back-panel backlights screens, exposing pinholes, emulsion and residue for thorough degreasing, developing and reclaiming. Stainless steel.

Coats screens evenly and uniformly. Made from hard, gold anodized aluminum. Enclosures are permanent for quick cleaning without leaking. Has rubber edge protector for storage. Sizes to 15".