Friskets and Masks

Apply this liquid rubber watercolor mask with a brush to areas of the painting that you want to remain unpainted. Allow several minutes for drying time, then paint over the masking. Remove by peeling or rubbing. Can be thinned with water. 1 oz glass jar.

Grumbacher Miskit Frisket 559 is a fluorescent orange color, for use on hard-sized watercolor papers, photos and other media, to mask areas that are meant to be painted once the dried frisket is removed. Washes out of pens and brushes with soap and water.

This high-quality, non-pigmented liquid frisket is ideal for watercolor masking. It dries to a neutral cream color that shows through dry paint, so that you can see exactly where you've masked.

Composed of natural rubber latex, ammonia and water, this milky fluid masks out surfaces. It dries to a flexible and water resistant film that is easy to remove. Housed in a 75 ml glass jar with twist-off cap.

Masking made easy! Masquepen is as easy to use and as precise as a pen for the ultimate in user control. Draw thick, thin, straight lines, or curves. The pale blue water-based latex solution is easy to see, apply, and peels away from paper like a charm.

This removable gray liquid frisket for watercolor and airbrush is water soluble when wet, but dries waterproof.

Aqua Fix can be mixed with watercolor paint in lieu of water or applied over a watercolor wash. It makes the surface waterproof and allows successive washes of color that do not disturb one another — colors remain clean and vibrant.

Use these removable fluids to make specific areas water resistant. They will retain areas of white paper or areas of underpainting, then easily rub off with a finger or eraser. The handy dispensing bottle allows for fine detail work.

Shiva Liquid Masque is for watercolor and airbrush painting. With a brush, apply the masque to areas where color is not wanted. Paint as desired. When dry, remove the masque by peeling or rubbing. Use Shiva Liquid Masque Cleaner for cleaning brushes.

Use this removable, colorless liquid to mask areas of work that need protection when color is applied in broad washes. It is specifically designed for soft sized papers to avoid staining. Made from rubber and latex staining.

A non-removable, transparent liquid mask, this medium is excellent for detail. It can be applied directly onto the paper, or mixed first with watercolors. Ensure that the fluid is thoroughly dry before overpainting.

These versatile, medium tack masking films are solvent-proof, adhere to any surface, won't release even when retouch lacquer is applied, and won't lift up paint when removed.

Low tack vinyl film will not lift surface nor strip off work already completed. Also used as a temporary protective overlay--leaves no residue. Translucent backing permits use with a light box for cutting. Matte finish.

Essential for work that requires controlled application, frisket film is a transparent masking film compatible with almost all surfaces. It is easy to peel and leaves no residue on the board. It's backed by a translucent paper for handling ease.

Essential for work that requires controlled application. Frisket film is a transparent, matte, masking film, compatible with almost all surfaces. Perfect for light protection, pre-cut stenciling, and masking and cutting. Easy to peel. Leaves no residue.